Steel Scarifier Cutters
Steel Cutters are the most economical tools in the market, and leave a long-lasting smooth finish. They are ideally used on lighter preparation work while getting ready for coating applications or removal of surface materials like carpet foam backing, adhesives, mastics, glues, rust from steel decks and some thin mill coatings. Good for general cleaning of concrete and asphalt surfaces, traffic line removal, paint and light coating removal, adhesives removal, stripping of compacted dirt, grease and oil deposits and de-rusting, de-scaling and ship decks. Available in blunt or sharp tooth configurations and fits all machines.
| Part # | Description | OD | ID | Thickness | Style |
|---|---|---|---|---|---|
| 1017 | Flue Cutter | 1-1/4" | 7/16" | 3/16" | 18 Sharp Teeth |
| 1002 | No. 1 Regular | 1-1/2" | 1/2" | 3/32" | 18 Sharp Teeth |
| 1001 | No. 1 Special | 1-5/8" | 1/2" | 3/32" | 18 Sharp Teeth |
| 1006 | No. 4ST | 2" | 5/8" | 3/16" | 12 Sharp Teeth |
| 1008 | No. 6ST | 3" | 1" or 1-3/16" | 3/16" | 15 Sharp Teeth |
| 1010 | No. 7ST | 2-3/8" | 3/4" or 1" | 3/16" | 15 Sharp Teeth |
| 1015 | No. 2 Chipper | 1-1/2" | 5/8" | 1/8" | 18 Hooked Teeth |
| 1016 | No. 21 Chipper | 1-1/4" | 5/8" | 1/8" | 18 Hooked Teeth |
| 1003 | No. 1 RC | 2" | 3/4" | 5/32" | 18 Sharp Teeth |
| 1004 | No. 3 RC | 2" | 3/4" | 5/32" | 12 Blunt Teeth |
| 1005 | No. 4 RC | 2" | 5/8" | 5/32" | 12 Blunt Teeth |
| 1007 | No. 6 RC | 3" | 3/4", 1" or 1-3/16" | 3/16" | 15 Blunt Teeth |
| 1009 | No. 7RC | 2-3/8" | 3/4" or 1" | 3/16" | 15 Blunt Teeth |
| 1011 | No. 9RC | 2" | 3/4" | 5/32" | 15 Blunt Teeth |
| 1012 | No. 12RC | 2" | 1/2" | 3/16" | 18 Sharp Teeth |
| 1013 | No. 21RC | 2" | 1/2" | 5/32" | 18 Sharp Teeth |
| 1014 | No. S-12 | 1-5/8" | 1/2" | 1/8" | 12 Blunt Teeth |